The VGC301 can operate the InstruTech CVG101 Worker Bee convection or your existing Granville-Phillips® Convectron® vacuum gauge sensor.

VGC301 Controller with guage

  • 1.00E-04 to 1,000 Torr
  • 1.30E-04 to 1,333 mbar
  • 1.30E-02 Pa to 133 kPa

The VGC301 is a single channel convection gauge controller.

Yes. The VGC301 is of the 1/8 DIN design and can be installed in a rack using the appropriate hardware.

You need to acquire the cable assemblies offered by InstruTech.

The standard cable lengths are 10 ft, 25 ft and 50 ft. InstruTech can provide longer cable assemblies if needed.

The VGC301 is powered by user supplied 12 to 28 Vdc, 2 W, or by InstruTech series PS301 optional power supplies.

1 analog output, 2 setpoint relays and RS232 / RS485 serial communications.